Category Archives: Howto

LED Tail-light Upgrade for BMW K1200S/R

If you have a K1200S, K1200R, or K1300S/R with the original red incandescent tail-light, you can now update it to a nice LED unit with a retrofit kit direct from BMW. It will set you back a couple hundred bucks, but gives you a much more conspicuous rear-end. The brake light in particular is like night and day compared to the original.

Continue Reading »

HOWTO: Custom header for Drupal’s Minnelli theme

Drupal comes with the excellent Garland theme, which is a fluid-width theme, and additionally a theme called Minnelli, which is fixed-width version of the same theme. The Image Fortunately, it’s wonderfully easy to create a custom header image for Minnelli: Click image for actual-size JPEG.  First, create your header image. It should be 980 x […]

Continue Reading »

Using a Dell 2007WFP Panel: 1680×1050 DVI on Linux

I ran into an issue configuring Linux (Ubuntu specifically) to use the native 1680×1050 resolution of a Dell 2007WFP widescreen monitor. So I came up with a modeline that worked, and thought I’d post it here. Following are the relevant sections my xorg.conf

BTW, I’m using the Ubuntu-provided NVidia drivers, and running a generic FX5200 card. Note that this is for the DVI input only (119mhz). Modelines for the analog input will be different. (Link to Dell’s documentation)

Continue Reading »

Installing GhostPCL on FreeBSD

To install GhostPCL on FreeBSD, first install ghostscript. I don’t run X on my server so I used ghostscript-afpl-nox11 found in /usr/ports/print/

Next get GhostPCL, and save the bz2 file in /usr/local/src. For this article, I’m using GhostPCL 1.41, and FreeBSD 5.3.

Compiling GhostPCL on FreeBSD requires some changes to get it to go. Two of the errors you might see are as follows:

Continue Reading »

Cleaning the Nikon Coolscan IV ED (LS-40) Film Scanner

I’ve recently been given some slides to scan, pictures from when Dana was a kid. After trying out the transparency adapter on my trusty Epson Perfection 1650, I realized that for these particular images I wanted more quality than the Epson could provide. It’s an excellent scanner, but the slide/film part is a weakness.

Continue Reading »